Air conditioning systems adapted to transport stops powered by renewable energies. (Machine-translation by Google Translate, not legally binding)

摘要

Air conditioning system adapted to transport stops consists of: A) The air conditioning system is enveloped by a casing which has holes (8) in its lower area. Inside the casing there is a motor (4) that rotates air conditioning turbines (6). Underneath the turbines (6) there is located a quartz infrared heating tube (7), the tube (7) can be chosen to be straight, which has the shape of a coil tube, or which is a grid with infrared . The motor (4) that rotates the air conditioning turbines (6) is connected to rotary connection rings (12), which are made of copper and are located on the side of the housing. Copper brushes (11) feed the rotary connecting rings (12), and other brushes (11) feed an external motor (18). The copper brushes (11) are connected by heat-resistant cables (5) to a thermostat (9), and this to an electrical transformer (10) that is connected to a battery (2). The motion sensor (3), the switch that lights the system, the copper brushes (11), the central unit, a timer (17), and the thermostat (9) are connected by the wiring (5) to the transformers electrical (10) or directly to the battery (2). And the battery (2) is connected by wires (5) to the solar panel (1) or to a wind power generator. B) Under the air conditioning turbines (6) a heat radiator tube (7) is located, which may be in the form of a coil tube, or be a grid with infrared. It can be chosen that under the turbines (6) there is a capsule (13) which is lined inside by thermal insulating material, inside it can carry water, refrigerant gas, liquid refrigerant, or liquid nitrogen. The capsule (13) holds a metal grid or a metal tube (16) both have a hollow interior and their side end is closed. The capsule (13) is connected to the grid or to the tube by a non-return gate, or by means of a solenoid valve that is opened and closed remotely, by means of the internet thanks to a Wi-Fi card. The capsule (13) has an opening closed by a stopper. One or several peltier cells in stages (14) (cells superposed one on top of the other), are composed of narotechnological systems, which transmit heat or cold to the metallic surface of the grid or tube (16) according to their polarity. The peitier cells (14) are connected to the connection rings (12), or to another power source. The peltier cells (14) always have a heat sink on the face opposite the one that transmits heat or cold. C) You can have the following renewable energy systems: A photovoltaic solar panel (1) connected to a battery (2), or a battery that is also a solar panel. Another system of renewable energy is wind energy, which recharges the battery (2) on cloudy days, can be chosen between wind turbines with vertical axis, and three-bladed wind turbine. You can also choose as a power source a windmill as a tool to produce electricity with a size scale that adapts to the stop. D) The cabin in which the air conditioning system is installed is composed of a roof, three walls and a transparent sliding door (15), which is automatically opened and closed by an electronic device, or a motion sensor (3). The cab can be chosen to have a rectangular, cube, semi-capsule or hemispherical shape. Between the air conditioning system and the roof of the stop, there is always a relative distance. The cab has an electronic control module of the air conditioning system composed of microcircuits that connect an electronic board to a test plate which includes a triac, a switch on and off, a switch of direction of the propellers, a bridge, a potentiometer, and other components that control the operation of the system. A weather station consisting of an electronic board that supports the internet and wifi network, also contains a software to surf the internet and a wifi card, the electronic board rests on several ramps that are on the motherboard. The electronic board gives the signal to a rain sensor, an ambient humidity sensor, a light cell, a wind-measuring sensor, a x-ray sensor, a volumetric sensor or pin (motion detector), and a sensor that measure the temperature or thermometer. The weather station also contains a potentiometer, connectors or covers for terminals that collect the ends of the wiring (13), and a switch with a led, the electronic board contains some values that activate, and deactivate the air conditioning thus adapting the ideal temperature to the transport stop.