首页> 外文OA文献 >Linearizing Radio Frequency Power Amplifiers Using an Analog Predistortion Technique
【2h】

Linearizing Radio Frequency Power Amplifiers Using an Analog Predistortion Technique

机译:使用模拟预失真技术线性化射频功率放大器

摘要

As critical elements of the physical infrastructure that enables ubiquitous wireless connectivity, radio frequency power amplifiers (RFPAs) are constantly pushed to the limits of linear but efficient operation. Digital predistortion, as a means of circumventing the limitations of this inherent linearity – efficiency trade-off, has been a subject of prolific research for well over a decade. However, to support the unrestrained growth of broadband mobile traffic, wireless networks are expected to rely increasingly on heterogeneously-sized small cells which necessitate new predistortion solutions operating at a fraction of the power consumed by digital predistortion approaches.This thesis pertains to an emerging area of research involving analog predistortion (APD) – a promising, low-power alternative to digital predistortion (DPD) for future wireless networks. Specifically, it proposes a mathematical function that can be used by the predistorter to linearize RFPAs. As a preliminary step, the challenges of transitioning from DPD to APD are identified and used to formulate the constraints that APD imposes on the predistorter function. Following an assessment of the mathematical functions commonly used for DPD, and an analysis of the physical mechanisms of RFPA distortion, a new candidate function is proposed. This function is both compatible with and feasible for an APD implementation, and offers competitive performance against more complex predistorter functions (that can only be implemented in DPD).The proposed predistorter function and its associated coefficient identification procedure are experimentally validated by using them to linearize an RFPA stimulated with single-band carrier aggregated signals of progressively wider bandwidths. The solution is then extended to the case of dual-band transmission, and subsequently validated on an RFPA as well. The proposed function is a cascade of a finite impulse response filter and an envelope memory polynomial and has the potential to deliver far better linearization results than what has been demonstrated to date in the APD literature.
机译:作为实现无处不在的无线连接的物理基础架构的关键要素,射频功率放大器(RFPA)一直被推向线性但高效运行的极限。作为克服固有线性度限制的一种手段,数字预失真是效率折衷的方法,十多年来一直是多产研究的主题。但是,为了支持宽带移动业务的无限制增长,无线网络将越来越依赖异构大小的小型小区,这需要新的预失真解决方案以数字预失真方法所消耗的功率的一小部分进行工作。涉及模拟预失真(APD)的研究—一种有希望的,低功耗的数字预失真(DPD)替代产品,可用于未来的无线网络。具体来说,它提出了一个数学函数,预失真器可以使用该函数来线性化RFPA。作为第一步,确定了从DPD过渡到APD的挑战,并将其用于阐述APD对预失真器功能施加的约束。在评估了通常用于DPD的数学函数并分析了RFPA失真的物理机制之后,提出了一种新的候选函数。此功能与APD实现兼容且可行,并且与更复杂的预失真器功能(只能在DPD中实现)相比具有竞争性。通过对它们进行线性化,实验验证了所提出的预失真器功能及其相关系数识别过程用带宽逐渐增大的单频带载波聚合信号激励的RFPA。然后,该解决方案扩展到双频传输的情况,并随后也在RFPA上进行了验证。所提出的功能是有限脉冲响应滤波器和包络存储多项式的级联,并且有可能提供比迄今为止APD文献中更好的线性化结果。

著录项

  • 作者

    Islam Anik;

  • 作者单位
  • 年度 2015
  • 总页数
  • 原文格式 PDF
  • 正文语种 en
  • 中图分类

相似文献

  • 外文文献
  • 中文文献
  • 专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号