首页> 外文OA文献 >Cooperative Relaying and Resource Allocation in Future-Generation Cellular Networks
【2h】

Cooperative Relaying and Resource Allocation in Future-Generation Cellular Networks

机译:下一代蜂窝网络中的协作中继和资源分配

摘要

Driven by the significant consumer demand for reliable and high data rate communications, the future-generation cellular systems are expected to employ cutting-edge techniques to improve the service provisioning at substantially reduced costs. Cooperative relaying is one of the primary techniques due to its ability to improve the spectrum utilization by taking advantage of the broadcast nature of wireless signals. This dissertation studies the physical layer cooperative relaying technique and resource allocation schemes in the cooperative cellular networks to improve the spectrum and energy efficiency from the perspectives of downlink transmission, uplink transmission and device-to-device transmission, respectively.For the downlink transmission, we consider an LTE-Advanced cooperative cellular network with the deployment of Type II in-band decode-and-forward relay stations (RSs) to enhance the cell-edge throughput and to extend the coverage area. This type of relays can better exploit the broadcast nature of wireless signals while improving the utilization of existing allocated spectral resources. For such a network, we propose joint orthogonal frequency division multiplexing (OFDM) subcarrier and power allocation schemes to optimize the downlink multi-user transmission efficiency. Firstly, an optimal power dividing method between eNB and RS is proposed to maximize the achievable rate on each subcarrier. Based on this result, we show that the optimal joint resource allocation scheme for maximizing the overall throughput is to allocate each subcarrier to the user with the best channel quality and to distribute power in a water-filling manner. Since the users' Quality of Service (QoS) provision is one of the major design objectives in cellular networks, we further formulate a lexicographical optimization problem to maximize the minimum rate of all users while improving the overall throughput. A sufficient condition for optimality is derived. Due to the complexity of searching for the optimal solution, we then propose an efficient, low-complexity suboptimal joint resource allocation algorithm, which outperforms the existing suboptimal algorithms that simplify the joint design into separate allocation. Both theoretical and numerical analyses demonstrate that our proposed scheme can drastically improve the fairness as well as the overall throughput.As the physical layer uplink transmission technology for LTE-Advanced cellular network is based on single carrier frequency division multiple access (SC-FDMA) with frequency domain equalization (FDE), this dissertation further studies the uplink achievable rate and power allocation to improve the uplink spectrum efficiency in the cellular network. Different from the downlink OFDM system, signals on all subcarriers in the SC-FDMA system are transmitted sequentially rather than in parallel, thus the user's achievable rate is not simply the summation of the rates on all allocated subcarriers. Moreover, each user equipment (UE) has its own transmission power constraint instead of a total power constraint at the base station in the downlink case. Therefore, the uplink resource allocation problem in the LTE-Advanced system is more challenging. To this end, we first derive the achievable rates of the SC-FDMA system with two commonly-used FDE techniques, zero-forcing (ZF) equalization and minimum mean square error (MMSE) equalization, based on the joint superposition coding for cooperative relaying. We then propose optimal power allocation schemes among subcarriers at both UE and RS to maximize the overall throughput of the system. Theoretical analysis and numerical results are provided to demonstrate a significant gain in the system throughput by our proposed power allocation schemes.Besides the physical layer technology, the trend of improving energy efficiency in future cellular networks also motivates the network operators to continuously bring improvements in the entire network infrastructure. Such techniques include efficient base station (BS) redesign, opportunistic transmission such as device-to-device and cognitive radio communications. In the third part of this dissertation, we explore the potentials of employing cooperative relaying in a green device-to-device communication underlaying cellular network to improve the energy efficiency and spectrum utilization of the system. As the green base station is powered by sustainable energy, the design objective is to enhance both sustainability and efficiency of the device-to-device communication. Specifically, we first propose optimal power adaptation schemes to maximize the network spectrum efficiency under two practical power constraints. We then take the dynamics of the charging and discharging processes of the energy buffer at the BS into consideration to ensure the network sustainability. To this end, the energy buffer is modeled as a G/D/1 queue where the input energy has a general distribution. Power allocation schemes are proposed based on the statistics of the energy buffer to further enhance the network efficiency and sustainability. Theoretical analysis and numerical results are presented to demonstrate that our proposed power allocation schemes can improve the network throughput while maintaining the network sustainability at a certain level.Our analyses developed in this dissertation indicate that the cooperative transmission based on cooperative relaying can significantly improve the spectrum efficiency and energy efficiency of the cellular network for downlink transmission, uplink transmission and device-to-device communication. Our proposed cooperative relaying technique and resource allocation schemes can provide efficient solutions to practical design and optimization of future-generation cellular networks.
机译:在消费者对可靠和高数据速率通信的巨大需求的推动下,预计下一代蜂窝系统将采用最先进的技术来以大大降低的成本改善服务供应。协作中继是主要技术之一,因为它具有通过利用无线信号的广播性质来提高频谱利用率的能力。本文分别从下行链路传输,上行链路传输和设备到设备传输的角度研究了协作蜂窝网络中的物理层协作中继技术和资源分配方案,以分别提高频谱和能效。考虑部署具有II型带内解码转发中继站(RS)的LTE-Advanced协作蜂窝网络,以增强小区边缘吞吐量并扩展覆盖范围。这种类型的中继可以更好地利用无线信号的广播性质,同时提高现有分配频谱资源的利用率。对于这样的网络,我们提出了联合正交频分复用(OFDM)子载波和功率分配方案,以优化下行链路多用户传输效率。首先,提出了一种在eNB和RS之间的最优功率分配方法,以使每个子载波上的可达到速率最大化。基于此结果,我们表明使总吞吐量最大化的最佳联合资源分配方案是以最佳信道质量为用户分配每个子载波,并以注水的方式分配功率。由于用户服务质量(QoS)的提供是蜂窝网络的主要设计目标之一,因此,我们进一步制定了词典编排优化问题,以最大程度地提高所有用户的最小速率,同时提高整体吞吐量。得出了最优性的充分条件。由于寻找最优解的复杂性,我们提出了一种高效,低复杂度的次优联合资源分配算法,该算法优于现有的将联合设计简化为单独分配的次优算法。理论和数值分析均表明,本文提出的方案可以极大地提高公平性和整体吞吐量。LTE-Advanced蜂窝网络的物理层上行传输技术基于单载波频分多址(SC-FDMA),频域均衡(FDE),本文进一步研究了上行可达到的速率和功率分配,以提高蜂窝网络中的上行频谱效率。与下行链路OFDM系统不同,SC-FDMA系统中所有子载波上的信号是按顺序而不是并行发送的,因此用户可达到的速率不只是所有已分配子载波上速率的总和。此外,在下行链路情况下,每个用户设备(UE)具有其自己的发送功率约束,而不是基站处的总功率约束。因此,高级LTE系统中的上行链路资源分配问题更具挑战性。为此,我们首先基于协作中继的联合叠加编码,使用两种常用的FDE技术(零强制(ZF)均衡和最小均方误差(MMSE)均衡)得出SC-FDMA系统的可实现速率。 。然后,我们在UE和RS的子载波之间提出最佳功率分配方案,以使系统的整体吞吐量最大化。理论分析和数值结果证明了我们提出的功率分配方案在系统吞吐量方面的巨大收益。除了物理层技术之外,未来蜂窝网络的能源效率的改善趋势也激励网络运营商不断改进网络吞吐量。整个网络基础架构。这些技术包括高效的基站(BS)重新设计,机会传输(例如设备到设备)和认知无线电通信。在本文的第三部分,我们探索了在绿色的设备到设备通信底层蜂窝网络中采用协作中继的潜力,以提高系统的能量效率和频谱利用率。由于绿色基站由可持续能源提供动力,因此设计目标是增强设备间通信的可持续性和效率。具体来说,我们首先提出最佳功率自适应方案,以在两个实际功率约束下最大化网络频谱效率。然后,我们将考虑BS处能量缓冲区的充电和放电过程的动力学,以确保网络的可持续性。为此,能量缓冲区被建模为G / D / 1队列,其中输入能量具有一般分布。根据能量缓冲器的统计数据提出了功率分配方案,以进一步提高网络效率和可持续性。理论分析和数值结果表明,本文提出的功率分配方案可以在一定程度上保持网络可持续性的同时,提高网络吞吐量。本文的研究表明,基于合作中继的合作传输可以显着改善频谱。蜂窝网络用于下行链路传输,上行链路传输和设备到设备通信的效率和能效。我们提出的协作中继技术和资源分配方案可以为下一代蜂窝网络的实际设计和优化提供有效的解决方案。

著录项

  • 作者

    Zhang Xiaoxia;

  • 作者单位
  • 年度 2015
  • 总页数
  • 原文格式 PDF
  • 正文语种 en
  • 中图分类

相似文献

  • 外文文献
  • 中文文献
  • 专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号