Kinetic modelling of Fenton-mediated oxidation: reaction mechanism, applications, and optimization.

摘要

The ever-increasing detection of harmful organic and inorganic compounds in habitable areas throughout the world has led to mounting research into applications and techniques for the treatment of contaminated soils, surface and groundwaters, and chemical and industrial wastewaters. Chemical oxidation technologies, in particular Fenton-based remediation systems, have exhibited considerable potential for the effective treatment and remediation of such contaminated waters and soils.The use of Fenton-based oxidation systems for the treatment of contaminated waters and wastewaters warrants the development of kinetic models capable of accurately simulating system behaviour. In this thesis, the kinetics of Fenton-mediated oxidation systems and kinetic models based on its governing reaction mechanism are investigated in order to highlight those parameters and conditions that effect Fenton chemistry and oxidation performance, and to demonstrate the application of such kinetic models to design and improve treatment systems.Experimental and simulated data describing the oxidation of formic acid by Fenton's reagent at low pH (3 to 4) and under a variety of initial conditions, operating regimes, and solution environments supports a proposed reaction mechanism that nominates the hydroxyl radical (OH) as the active oxidizing intermediate in Fenton-based oxidation systems. Laboratory experiments demonstrate that formic acid oxidation is inhibited in the presence of oxygen, and model simulations of these systems reveals that such behaviour is due to the effect organic radical intermediates and/or by-products have in assisting or hindering the redox cycling of the catalytic iron species. The critical role that iron redox cycling plays in affecting oxidation performance is further highlighted by experimental and simulated studies at alternate pHs and using different target organics, including those that react directly with iron in a redox capacity. Experiments at pH 4 reveal an increase in the redox cycling of iron and improved oxidation performance compared to pH 3 as the higher pH favours the superoxide radical, a stronger reductant than the hydroperoxyl radical that predominates at pH 3. Other laboratory and modelling studies on the Fenton-mediated oxidation of certain aromatic compounds highlight the manner in which quinone and quinone-like compounds, being added directly or generated as oxidation by-products, can improve oxidation performance via redox reactions with iron. Further simulations reveal the type of practical design and operating information kinetic models can provide for treatment processes, though it is noted an appropriate understanding of the oxidation mechanism of the target species is necessary for the accurate application of the model.