首页> 外文OA文献 >Effect of rotor stiffness and lift offset on the aeroacoustics of a coaxial rotor in level flight
【2h】

Effect of rotor stiffness and lift offset on the aeroacoustics of a coaxial rotor in level flight

机译:水平飞行中转子刚度和升力偏移对同轴转子气动声学的影响

摘要

The acoustic characteristics of a twin contra-rotating coaxial rotor configuration with significant flapwise stiffness are investigated in steady forward flight. The Vorticity Transport Model is used to simulate the aerodynamics of the rotor system and the acoustic field is determined using the Ffowcs Williams-Hawkings equation implemented using the Farassat-1A formulation. Increasing the hub stiffness alters the strengths of the blade vortex interactions, particularly those between the upper and lower rotors, and affects the intensity and directivity of the blade vortex interaction noise produced by the system. The inter-rotor blade vortex interaction on the advancing side of the lower rotor is the principal source of the most intensively focused noise that is generated by a conventionally articulated coaxial rotor system. For stiffened coaxial rotors, this particular inter-rotor blade vortex interaction is weakened as a result of a broad redistribution in lateral loading, yielding a reduction in the intensity of the noise that is produced by this interaction. The spanwise distribution of loading on the rotors of a stiffened coaxial system can be modified further by altering the lateral partition of lift (or lift offset). It is shown that decreasing the lift offset has the effect of counteracting the redistribution of loading due to flapwise stiffness and hence increases the blade vortex interaction noise as well as the power consumed by the rotor. Conversely, a reduction in both the power consumption and the blade vortex interaction noise is observed if the lift offset is increased, with the maximum benefit of lift offset being achieved at high speed. The computational results suggest that the noise from the dominant inter-rotor blade vortex interaction can be ameliorated through the use of lift offset control on stiffened coaxial systems, to the extent that the noise produced by this interaction can be made to be comparable to that produced by the other, weaker interactions between the two rotors of the system.
机译:在稳定的前向飞行中研究了具有显着的襟翼刚度的双反向旋转同轴转子结构的声学特性。涡流传输模型用于模拟转子系统的空气动力学,而声场是通过使用Farassat-1A公式实现的Ffowcs Williams-Hawkings方程确定的。轮毂刚度的增加会改变叶片涡旋相互作用的强度,尤其是上下转子之间的强度,并会影响系统产生的叶片旋涡相互作用噪声的强度和方向性。下转子前进侧的转子间叶片涡旋相互作用是由传统的铰接式同轴转子系统产生的最强烈聚焦噪声的主要来源。对于刚性同轴转子,由于横向载荷的广泛重新分布,这种特殊的转子间叶片涡旋相互作用被削弱,从而降低了由这种相互作用产生的噪声的强度。可以通过更改举升的横向间隔(或举升偏移量)来进一步修改刚性同轴系统的转子上的载荷在翼展方向上的分布。结果表明,减小升程偏移量具有抵消由于襟翼方向刚度引起的载荷重新分布的作用,因此会增加叶片涡旋相互作用的噪声以及转子所消耗的功率。相反,如果增加升程偏移,则可以观察到功耗和叶片涡旋相互作用噪声的降低,并且在高速下可以获得升程偏移的最大好处。计算结果表明,通过在刚性同轴系统上使用升程偏移控制,可以改善主要的转子间叶片涡旋相互作用产生的噪声,其程度可以使这种相互作用产生的噪声与产生的噪声相当另一方面,系统的两个转子之间的相互作用较弱。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号