首页> 外文OA文献 >Aggregation and micellization of sodium dodecyl sulfate in the presence of Ce(III) at different temperatures: A conductometric study
【2h】

Aggregation and micellization of sodium dodecyl sulfate in the presence of Ce(III) at different temperatures: A conductometric study

机译:Ce(III)存在下不同温度下十二烷基硫酸钠的聚集和胶束化:电导研究

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Aggregation properties of sodium dodecyl sulfate (SDS) in the presence of cerium(III) chloride, at various temperatures (298.15-323.15 K) have been measured by the electrical conductance technique. The experimental data on aqueous solutions as a function of SDS concentration show the presence of two inflexion points indicating the presence of two distinct interaction mechanisms: the first, occurring at SDS concentrations below the critical micelle concentration of the pure surfactant, which can be explained by the formation of aggregates between dodecyl sulfate (DS-) and Ce(III), while the second one, at SDS concentrations around the critical micelle concentration (cmc) of the pure surfactant which is due to the SDS micellization. The aggregation between DS- and Ce(III) was confirmed by static light scattering. The binding ratio of DS-/Ce(III) changes from 6 to 4, shows a slight dependence on the Ce(III) concentration and is independent of the temperature. The thermodynamic micellization parameters, Gibbs energy, enthalpy and entropy of micellization were calculated on the basis of the experimental data for the aggregation concentration, and the degree of counterion dissociation of the micelles. The SDS micellization is energetically favoured by increasing either the concentration of CeCl3 or the temperature. Such behaviour is clearly dominated by a decrease of the micellization (exothermic) enthalpy. The entropy of micellization approaches zero as the cerium(III) chloride concentration and temperature increase.
机译:通过电导技术测量了十二烷基硫酸钠在氯化铈(III)存在下在各种温度(298.15-323.15 K)下的聚集性能。水溶液作为SDS浓度的函数的实验数据表明存在两个拐点,表明存在两种不同的相互作用机制:第一种,发生在SDS浓度低于纯表面活性剂的临界胶束浓度的情况下,这可以通过以下方式解释:在十二烷基硫酸盐(DS-)和Ce(III)之间形成聚集体,而第二种聚集体则是由于SDS胶束化,在纯表面活性剂的临界胶束浓度(cmc)附近的SDS浓度下。 DS-和Ce(III)之间的聚集通过静态光散射确认。 DS- / Ce(III)的结合比从6变为4,显示出对Ce(III)浓度的轻微依赖性,并且与温度无关。根据聚集浓度和胶束的抗衡离子解离度的实验数据,计算了热力学胶束化参数,吉布斯能量,胶束的焓和熵。通过增加CeCl3的浓度或温度来大力促进SDS胶束化。明显地,这种行为被胶束化(放热)焓的降低所支配。随着氯化铈(III)浓度和温度的升高,胶束化的熵接近零。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号