首页> 外文OA文献 >A Comparative Study between Via-Hole and Via-Free Grounded Coplanar Waveguide to Microstrip Transitions on Thin Polymer Substrate
【2h】

A Comparative Study between Via-Hole and Via-Free Grounded Coplanar Waveguide to Microstrip Transitions on Thin Polymer Substrate

机译:通孔与通过无通过接地共面波导的比较研究薄聚合物基材上的微带转变

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

A comparative study between via-holed and via-free back-to-back GCPW-MS-GCPW (Grounded Coplanar Waveguide-Microstrip lines) transitions is reported in this paper. According to simulation results, both via-holed and via-free transitions on commercial benzocyclobutene polymer 20 µm film show a bandwidth over 57 GHz. Bandwidth of optimized via-holed transitions increases with the via-hole diameter, up to 75 GHz with 300 μm via-hole diameter. The via-hole free transition achieves experimentally an ultrabroadband from 2 GHz to 78 GHz with an insertion loss of only 0.5 dB thanks to the copper metallization thickness of 2 μm. In addition, these measurement results are in perfect agreement with the simulation results. These via-free and via-holes transitions are very useful and requested in component packaging, on-wafer measurements of microstrip based microwave integrated circuits, and also the interconnections in hybrid circuits including both microstrip and coplanar structures.
机译:本文报道了通孔孔和可通过无透过的背对背GCPW-MS-GCPW(接地的Coplanar波导 - 微带线)转变的比较研究。根据仿真结果,商业苯并丁烯聚合物20μm薄膜上的通孔和无通过的过渡显示出超过57GHz的带宽。优化的通孔过渡的带宽随通孔直径的增加,高达75GHz,通孔直径为300μm。通过2GHz至78GHz,Via-Hole自由过渡从2GHz到78GHz实现,由于铜金属化厚度为2μm,只有0.5 dB的插入损耗。此外,这些测量结果与模拟结果完美一致。这些通过无透孔和通孔过渡非常有用,并且在组件包装中,基于微带的微波集成电路的晶片上的晶圆测量,以及包括微带和共面结构的混合电路中的互连。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号