LEADING-EDGE SERRATIONS WHICH REDUCE THE NOISE OF LOW-SPEED ROTORS

摘要

Acoustic effects of serrated brass strips attached near the leading edges of two different size rotors were investigated. The two-bladed rotors were tested in hover. Rotor rotational speed, blade angle, serration shape, and serration position were varied. The serrations were more effective as noise suppressors at rotor tip speeds less than 135 m/sec (444 ft/sec) than at higher speeds. High frequency noise was reduced but the low frequency rotational noise was little affected. Noise reductions from 4 to 8 dB overall sound pressure level and 3 to 17 dB in the upper octave bands were achieved on the 1.52 m (5.0 ft) diameter rotor. Noise reductions up to 4 dB overall sound pressure level were measured for the 2.59 m (8.5 ft) diameter rotor at some conditions.