首页> 美国政府科技报告 >The adsorption of argon and nitrogen on stainless steel at 195 deg K and 303 deg K in the pressure range 10 to the minus 8 power to 10 to the minus 7 power torr

【24h】

The adsorption of argon and nitrogen on stainless steel at 195 deg K and 303 deg K in the pressure range 10 to the minus 8 power to 10 to the minus 7 power torr

机译：氩气和氮气在不锈钢上在195°K和303°K的压力范围内吸附，压力范围为10至负8功率至10至负7次幂

获取原文

页面导航

摘要
著录项
相似文献
相关主题

摘要

Measuring adsorption of argon and nitrogen at low pressures on stainless steel

著录项

作者
Mugler, J. P., Jr.; Wightman, J. P.;
展开▼
作者单位

展开▼
年度 1967
页码 1-32
总页数 32
原文格式 PDF
正文语种 eng
中图分类工业技术;
关键词
ADSORPTION; ARGON; LOW PRESSURE; NITROGEN; GAS EXPANSION; STAINLESS STEELS; TABLES (DATA);

机译：吸附;氩气低压;氮;气体膨胀;不锈钢;表（数据）;

相似文献

外文文献
专利

1. Electrical breakdown of a point‐plane gap in high vacuum and with variation of pressure in the range 10-7-10-2 Torr of air, nitrogen, helium, sulphur hexafluoride, and argon [J] . Journal of Applied Physics . 1974,第11期

机译：在高真空中点平面间隙的电击穿，并且压力在10-7-10-2的范围内变化空气，氮气，氦气，六氟化硫和氩气
2. Atmospheric ice nucleators active ≥ −12 °C can be quantified on PMsub10/sub filters [J] . F.Conen, S.Henne, C. E.Morris, Atmospheric Measurement Techniques . 2012,第2期

机译：活跃的大气冰晶核＆ge;可以在PM _{10 过滤器上量化＆-12;°C}
3. Atmospheric ice nucleators active ≥ −12 °C can be quantified on PMsub10/sub filters [J] . Conen F., Henne S., Morris C. E., Atmospheric Measurement Techniques Discussions . 2012,第2期

机译：活跃的大气冰晶核＆ge;可以在PM _{10 过滤器上量化＆-12;°C}
4. Charge efficiency of Sealed Nickel-Cadmium aircraft batteries over the temperature range of /spl minus/40/spl deg/C to 70/spl deg/C [C] . Johnson Z.W., Roberts J.E., Kulin T.M. Battery Conference on Applications and Advances, 1994 . 1994

机译：密封镍镉飞机电池在/ spl负/ 40 / spl deg / C至70 / spl deg / C的温度范围内的充电效率
5. Experimental pressure and heat transfer investigation over a "directed-energy air spike" inlet at flow mach numbers of 10 to 20, stagnation temperature of 1000 K, and arc powers up to 127 KW. [D] . Toro, Paulo Gilberto de Paula. 1998

机译：在流量为10至20的马赫数，停滞温度为1000 K，电弧功率高达127 KW的“定向能空气尖峰”入口上进行实验压力和传热研究。
6. Serrations on a Load-Extension Curve of 18-8 Stainless Steel at minus;269deg;C and the Effect of Martensitic Transformation on the Serrations [O] . Eiji Fukushima, Akira Goto, Mitsuzo Fushimi 1973

机译：在-269°C的18-8不锈钢的负载延伸曲线上的锯齿以及马氏体转化对锯齿的影响

The adsorption of argon and nitrogen on stainless steel at 195 deg K and 303 deg K in the pressure range 10 to the minus 8 power to 10 to the minus 7 power torr

摘要

著录项

相似文献

相关主题

期刊订阅