Laser trigger system for the Jupiter module

摘要

A UV laser trigger system has been designed to trigger the eight SF6 filled high voltage switches in the Jupiter module. The system is compact and modular, allowing for approximately thirty lasers to be triggered simultaneously in the full Jupiter design. The laser will be kinematically mounted near the high voltage section to minimize the path length to the high voltage switches and decrease the sensitivity to misalignment. The laser system is specifically built for the purpose of triggering the Jupiter module. It is a 265 nm UV laser system designed to generate eight simultaneous laser pulses of 10 mJ each with a 13 nsec pulsewidth. A 1061 nm solid-state Nd:Cr:GSGG laser is frequency quadrupled with a two stage doubling process. The 1061 nm fundamental laser energy is frequency doubled with a type II KTP crystal to generate 530 nm energy. The 530 nm output is frequency doubled with a type I KD*P crystal to generate 265 nm energy. The 265 nm pulse is split into eight parallel channels with a system of partially reflecting mirrors. Low timing jitter and a stable energy output level for the system were achieved. The entire optical system was packaged in a rugged, sealed aluminum structure 10 in. (times) 19 in. (times) 2.75 in. The size of the laser electronics unit is 7 in. (times) 8 in. (times) 8 in.