Borehole-to-surface electromagnetic methods -- System design and field examples

摘要

Borehole-to-surface electromagnetic (EM) methods are an attractive alternative to Surface-based EM methods for a variety of environmental and engineering applications. They have improved sensitivity to the subsurface resistivity distribution because of the closer proximity to the area of interest offered by the borehole for the source or the receiver. For the borehole-to-surface measurements the source is in the borehole and the receivers are on the surface. On the other hand, for the surface-to-borehole methods, the source is on the surface and the receiver is in a borehole. The surface-to-borehole method has an added advantage since measurements are often more accurate due to the lower noise environment for the receiver. For these methods, the source can be a grounded electric dipole or a vertical magnetic dipole source. An added benefit of these techniques is field measurements are made using a variety of arrays where the system is tailored to the application and where one can take advantage of some new imaging methods. In this short paper the authors describe the application of the borehole-to-surface method, discuss benefits and shortcomings, and give two field examples where they have been used for underground imaging. The examples were the monitoring of a salt water flooding of an oil well and the characterization of a fuel oil spill.