On the need to adopt strain-based probabilistic approach in predicting fatigue life

摘要

This paper presents a comparison of fatigue life prediction capabilities among three deterministic and one probabilistic strain-life models. Most existing life prediction models are deterministic even though the fatigue process is stochastic in nature. Therefore, variability in experimental fatigue life data is not statistically justified when the deterministic approach is adopted. In this study, the Coffin-Manson, Smith-Watson-Topper, Morrow, and Weibull regression models through the use of Miner's rule for damage accumulation process are each compared with the experimental data. Both available in the literature, two sets of experimental data for variable amplitude loading and random loading spectrum were used to explore the prediction accuracies of the models. Simulations were based on models to obtain additional results for different levels of maximum strain. They were conducted to investigate the maximum strain-life behaviour under random loading. Fatigue life comparisons were then performed, and the scatter band for type of load, level of strain amplitude, and each model separately were used for evaluations. The results show that the difference percentage in comparison with experimental data varies, but all the predictions are within the acceptable limit, that is, 50 when the factor of 2 was used. Weibull regression model has the lowest normalized-root-mean square error value (0.07) and thus has highest prediction capability among the models. Therefore, the probabilistic model is a better alternative for strain-life prediction compared with deterministic models.