首页> 外文期刊>NDT & E International: Independent Nondestructive Testing and Evaluation >Higher harmonic analysis of ultrasonic signal for ageing behaviour study of C-250 grade maraging steel
【24h】

Higher harmonic analysis of ultrasonic signal for ageing behaviour study of C-250 grade maraging steel

机译:超声信号的高次谐波分析,用于C-250级马氏体时效钢的时效研究

获取原文
获取原文并翻译 | 示例
           

摘要

Higher order harmonic analysis of ultrasonic signal has been applied to study the precipitation kinetics of 18Ni maraging steel. The material has been solution annealed (SA) at a temperature of 1088 K for 1 h and then air quenched. Ageing of SA materials have been done at 728 K for different durations of 10 min to 100 h and air cooled. It has been found that the measurement parameter of this new technique increases with the formation of finer precipitates at the initial stage of ageing till 12 h and then decreases at longer holding time with the coarsening of precipitates.
机译:超声信号的高次谐波分析已被用于研究18Ni马氏体时效钢的析出动力学。将该材料在1088 K的温度下进行溶液退火(SA)1小时,然后进行空气淬火。 SA材料的时效已在728 K下进行了10分钟到100小时的不同持续时间,并进行了空气冷却。已经发现,该新技术的测量参数在时效初期直至12 h时随着形成更细的析出物而增加,然后随着析出物的粗化而在更长的保持时间内降低。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号