首页> 外文期刊>Journal of Dairy Science >Gravity separation of raw bovine milk: Fat globule size distribution andfat content of milk fractions
【24h】

Gravity separation of raw bovine milk: Fat globule size distribution andfat content of milk fractions

机译:原料牛乳的重力分离:脂肪球大小分布和牛奶组分的脂肪含量

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

This project determined effects of time and temperature on changes of fat globule size distribution and fat content in milk fractions during gravity separation. Fresh raw bovine milk was gravity separated at 4 or 15 degrees C. After 2, 6, 12, and 48 h, seven fractions, from bottom fraction (F1) to top fraction (F7), were successively drained from a separation column. Higher temperature resulted in a faster rate of fat separation. Within 2 h, large fat globules had already moved to the top, and the volume mean diameter of F7 increased from 3.13 mu m (without separation) to 3.48 and 3.64 mu m, respectively, at 4 and 15 degrees C. In F7, there was little change in gfobule size distribution after 2 h, but fat content continued to increase with separation time. The fat content of F7 reached 26.6 after 48 h at 4 degrees C, achieving a 58.8 creaming capacity. For F1 to F6, longer separation time resulted in smaller fat globule sizes and lower fat contents, especially for Fl. After 48 h at 4 degrees C, the volume mean diameter of F1 decreased from 3.23 mu m (without separation) to 1.16 mu m, and fat content decreased from 3.75 (without separation) to 0.20. Gravity separation may have unique applications in the dairy industry today. Its simplicity makes it an effective procedure for small-scale dairy product manufacturers to produce milks with a range of fat contents without using a centrifugal cream separator.
机译:该项目确定了时间和温度对重力分离过程中脂肪球大小分布和牛奶中脂肪含量变化的影响。新鲜的生牛奶在4或15°C的温度下重力分离。2、6、12和48 h后,从底部馏分(F1)到顶部馏分(F7)的7个馏分依次从分离塔中排出。较高的温度导致脂肪分离的速度更快。在2 h内,大脂肪球已经向顶部移动,在4和15 C时,F7的体积平均直径分别从3.13 μ m(无分离)增加到3.48 μm和3.64 μ m。在F7中,2 h后gfobule尺寸分布变化不大,但脂肪含量随分离时间的增加而继续增加。F7在4°C下48 h后脂肪含量达到26.6%,乳化能力达到58.8%。对于 F1 至 F6,较长的分离时间导致脂肪球尺寸更小,脂肪含量更低,尤其是 Fl。4°C下48 h后,F1的体积平均直径从3.23 μ m(无分离)降至1.16 μm,脂肪含量由3.75%(无分离)降至0.20%。重力分离在当今的乳制品行业中可能具有独特的应用。它的简单性使其成为小型乳制品制造商在不使用离心式奶油分离机的情况下生产具有各种脂肪含量的牛奶的有效程序。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号