Displacement field reconstruction technique for plate-like structures based on model superposition method

摘要

To achieve real-time sensing and deformation reconstruction of flexible plate structure, a 3D reconstruction technique based on a quasi-distributed fiber grating sensor network and order-optimized modal superposition method is proposed. Graphic visualization is introduced to the field of deformation monitoring, then the displacement field reconstruction of the typical structure of spacecraft is realized. Firstly, a finite element model of the four-sided fixed-supported plate structure is constructed, and the conversion matrix of surface strain and displacement are obtained based on modal analysis, and then the modal parameters are optimized through static simulation experiments; Secondly, the influence of the number and position of sensors on the reconstruction accuracy is studied, then a high-density distributed fiber grating sensor network is attached to the surface of the plate to construct an experimental FBG model of the spacecraft; Finally, concentrated loads are applied to the structure at different positions, and structure’s surface strain information is collected by FBG network, then the morphological reconstruction of the deformed structure is realized based on the improved model superposition method, which proves the feasibility of the algorithm. The results show that the reconstruction method’s average absolute error is less than 0.13 mm, so this method can be used to displace field reconstruction problems of flexible structures.