A multistate per-cell magnetoresistive random-access memory (MRAM) that writes data by a thermally assisted technique and reads data using the angular-dependent magnetoresistance is proposed. A hard magnetic layer or pinned ferromagnetic layer (CoFe-IrMn) is used as the recording layer. The free layer serves as the read layer. Before reading, the free layer's magnetization is set to the initial state. For the N states per-cell MRAM, the magnetization angle of the ith state (i = O to N - 1) between the free layer and recording layer can be set to be acos(1 - 2*i/(N-1)). For example, in the four-state per-cell MRAM, the magnetization angle can be set to be acos(1), acos(1/3), acos(-1/3), and acos (-1), which represent the four states, respectively. More states can be obtained if the signal-to-noise ratio is sufficient. At near Curie point, a small external field can be used to record the signal. In order to verify the idea, a spin-valve giant-magnetoresistance memory cell was fabricated using e-beam lithography and ultrahigh voltage sputtering. A 25-mA heating current and a small external field are enough to assistant the writing process. A four-state per-cell memory is realized by this method.
展开▼
