Activated-carbon pore size tailoring is usually achieved by pore size reduction, pore size widening or more rarely by direct activation. Successive widening cycles composed of an initial molecular oxygen sorption step, followed by a carbonization step under nitrogen, have been applied to three different materials in order to study their gradual pore size modifications. For years, the whole microporosity obtained after several cycles is known to present better pore size distribution than those inherited from conventional activations. Moreover, as shown in the present paper, the gradual obtained microporosities cover a wide and valuable range of porous textures highly dependent on the initial material origin and initial activation. Gradual mean pore size evolutions of 1 or 2 A per cycle were observed linked to a simultaneous increase in microporous specific volume in the case of pitch-based and coconut activated carbons, respectively. Comparatively, the microporous specific volume of a commercial coconut carbon molecular sieve was increased by 26 percent without modification of its mean pore size and therefore of its sieving effect. Those results have been used to test a simple textural model of activated carbon porosity proposed in the recent literature.
展开▼
