Contact imaging in the atomic force microscope using a higher order flexural mode combined with a new sensor

摘要

Using an atomic force microscope (AFM) with a silicon cantilever partially covered with a layer of zinc oxide (ZnO), we have imaged in the constant force mode by employing the ZnO as both a sensor and actuator. The cantilever deflection is determined by driving the ZnO at the second mechanical resonance while the tip is in contact with the sample. As the tiphyphen;sample force varies, the mechanical boundary condition of the oscillating cantilever is altered, and the ZnO electrical admittance is changed. Constant force is obtained by offsetting the ZnO drive so that the admittance remains constant. We have also used the ZnO as an actuator and sensor for imaging in the intermittent contact mode. In both modes, images produced by using the ZnO as a sensor are compared to images acquired with a piezoresistive sensor. copy;1996 American Institute of Physics.