The effect of relative humidity (RH) on the adhesion of particles colliding with a hard surface was studied for submicron particles of liquid oleic acid, solid ammonium sulfate, and solid polystyrene latex (PSL). For this purpose, a three-arm impactor was designed and constructed. The three arms consisted of one impactor having an uncoated impaction plate (i.e., a rebound arm), one impactor having a viscous-liquid-coated impaction plate (i.e., a capture arm), and one impactor having no impaction plate (i.e., a null arm). The particle number concentrations downstream of each arm were measured by condensation particle counters (CPCs). Data were analyzed to obtain the particle rebound fraction. Use of ambient upstage pressure allowed measurements from 5 to 95 RH at the impaction plate. Particle rebound depended strongly on RH, even for non-hygroscopic PSL particles. The rebound fraction for PSL particles dropped monotonically from nearly unity at 50 RH to 0.4 at 95 RH. For ammonium sulfate, the rebound fraction dropped from nearly unity at 25 RH to 0.5 at 70 RH. The decreased rebound at higher RH was explained by the formation of a water meniscus. The resulting capillary forces inhibited particle detachment. A model, taking into account the impact kinetic energy compared to the contact adhesion energy arising from van der Waals and capillary forces, captured the observations well. The reduced rebound arising from increased adhesion at high RH, independent of particle water content, potentially confounds a recent assumption that non-rebounding atmospheric particles are liquid.
展开▼
