AbstractThe gaseous products generated by the flaming combustion of ten kinds of synthetic polymers and a kind of wood (cedar) under the same conditions (sample weight, 0.1 g; temperature, 700°C air flow rates, 50 and 100 l./hr) were quantitatively analyzed by infrared spectrophotometry, gas chromatography, and colorimetric tube method. The main hydrocarbons generated were methane, ethylene, and acetylene. The amount of acetylene generated by the flaming combustion of polymers was much larger than the amount of acetylene formed by pyrolysis at 700°C in nitrogen. Acetylene increased in quantity with increasing air. For nitrogen compounds, hydrogen cyanide was generated from every polymer containing nitrogen used, but ammonia was detected only for nylon 66 and polyacrylamide. Nitrogen monoxide and nitrogen dioxide were detected only in small amounts. Nitrous oxide was detected in the gaseous products generated by the nonflaming combustion of urea resin and melamin resin. It was also found that about 70 of the nitrogen in N‐66 and PAA was converted into nitrogen gas (N2) by combustion under the conditions described ab
展开▼
