Hydrogen sulfide (H{sub}2S) concentration and emission at a modern mechanically ventilated swine finishing building with a deep pit were continuously measured for three summer months. Ventilation rates, temperatures, and pig inventory in the building were also continuously measured or recorded. A total of 88 d of valid data were obtained between 26 June and 25 September; during which the average daily mean (ADM) ambient temperature was 21.8℃. The test began with 887, 19-kg pigs in the building and ended with 874, 83-kg pigs. Hydrogen sulfide was measured with a sulfur dioxide (SO{sub}2) analyzer equipped with a thermal oxidizer that converted H{sub}2S to SO{sub}2. Building ventilation rates were determined by continuously monitoring exhaust fan operation and differential static pressure. Daily mean building H25 concentrations ranged from 38 to 536 ppb. The ADM building concentration (average of three locations) was 173±21 ppb (mean ±95 confidence interval). The maximum concentration, averaged over 7- or 12-min sampling periods, was 1,624 ppb. The 25th, 50th (median), and 75th percentile values were 413, 527, and 662 g/d for daily mean building H{sub}2S emission and 4.4, 5.8, and 12.4 g d{sup}(-1) AU{sup}(-1) (animal unit = 500 kg live mass present in the building)for daily mean specific emission, respectively. These H{sub}2S emissions were much greater than emissions measured or estimated in previous studies. Based on daily means, H{sub}2S concentration was inversely proportional (P < 0.05) to ventilation rate (r = -0.68), whereas building H{sub}2S emission was influenced somewhat (P < 0.05) by building temperature (r = 0.29) and ventilation rate (r = 0.23).
展开▼