One-step metal electroplating and patterning on a plastic substrate using an electrically-conductive layer of few-layer graphene

摘要

Few-layer graphene (FLG) was investigated as an electrically-conductive interleaf layer for one-step electroplating and patterning of metal on nonconductive polymer substrates without using multiple and toxic pretreatment processes in traditional electroplating. An individual FLG (5-10 nm of thickness with 6.4 of oxygen content) was obtained by expanding graphite with microwave followed by exfoliating the expanded graphite with sonication in N-methyl-pyrrolidone. Stacking FLG in the in-plane direction, a robust FLG film was obtained by the vacuum-assisted filtering and drying methods, and transferred to a polyethylene terephthalate (PET) substrate via an intermediate transfer to the water surface. The sheet resistance of the FLG film on the PET substrate was 0.9 kΩ/sq with a thickness of 80 nm and the root-mean-square roughness of 29 nm. In the electroplating of nickel on the FLG film, hemisphere-shape metal seeds appeared in the early stage of electroplating and they subsequently grew up to 200-480 nm, which became connected to form a continuous nickel layer. The thickness of the continuous nickel layer increased linearly with electroplating time. The developed electroplating method demonstrated its capability of selective patterning on nonconductive substrates using a simple masking technique.