首页> 外文期刊>Journal of Applied Physics >Radiation sensor based on thin-film CdTe/CdS device structure and its radiation resistance under high-intensity hydrogen plasma
【24h】

Radiation sensor based on thin-film CdTe/CdS device structure and its radiation resistance under high-intensity hydrogen plasma

机译:基于薄膜CdTe/CdS器件结构的辐射传感器及其在高强度氢等离子体下的抗辐射性能

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

In this work, the ability of CdTe/CdS thin-film device structures prepared by the hot-wall method to detect ionizing radiation was investigated. The samples were fabricated with a structure typical of CdTe/CdS-based solar cells and exhibit radiation sensitivity even without the application of an external voltage. This allows such structures to be used as low-voltage radiation sensors. An investigation of the radiation resistance of the structures, namely, the effect of irradiation with high-intensity hydrogen plasma H2+ on the crystal structure and performance, was carried out. It was shown that the device structures remained operational after two plasma pulses at an ion density of 2 × 1023 m−2 and an energy density of up to 0.2 MJ/m2. With further exposure to plasma, the device structures deteriorated, first, due to gradual sputtering off of the back contact, and, second, as a result of diffusion processes that occurred when the structures were heated to high temperatures, due to which the entire volume of the CdTe base layer got converted into a CdSxTe1−x solid solution.
机译:本文研究了热壁法制备的CdTe/CdS薄膜器件结构对电离辐射的检测能力。这些样品采用基于CdTe/CdS的太阳能电池的典型结构制成,即使不施加外部电压,也表现出辐射敏感性。这使得这种结构可以用作低压辐射传感器。研究了结构的抗辐射性,即高强度氢等离子体H2+辐照对晶体结构和性能的影响。结果表明,在离子密度为2×1023 m−2和能量密度高达0.2 MJ/m2的两次等离子体脉冲后,器件结构仍能正常工作。随着进一步暴露于等离子体,器件结构恶化,首先是由于背接触逐渐溅射,其次是由于结构被加热到高温时发生的扩散过程,因此CdTe基层的整个体积转化为CdSxTe1−x固溶体。

著录项

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号