Investigating different types of fluids in pulsating heat pipes for improving heat transfer in an air-cooled heat exchanger

摘要

Air-cooled heat exchangers are utilized in various industries to cool process fluids. To have a better heat transfer, fins are used in the structure of exchangers. In this study, a set of experiments were performed to investigate the improvement in the amount of heat transfer in an air-cooled heat exchanger. For this purpose, a real case study was conducted on air-coolers in a natural gas compressor station; afterward, the finned tubes were replaced by pulsating heat pipes (PHPs), and a different type of fluid was applied to the pulsating heat pipes. The laboratory system was set up to measure the overall heat transfer coefficient under two conditions involving either finned tubes or a PHP with R134, R22, and filled acetone fluids. Finally, the results were verified by the theory method. The results showed that all the three fluid agents (R134, R22, and Acetone) with natural convection of 9.94 m/s, an inlet fluid velocity of 5.54 m/s, and an average feed velocity were able to enhance the heat transfer coefficient by 10, 13, and 11, respectively. In addition, compared with finned tubes, R134, R22, and Acetone improved the natural convection heat transfer coefficient by 22.2, 18.6, and 21.7, respectively.