TB 2897 (continued)

摘要

Stage 4: Tighten to 115 INB/LBS (13 Nm). Stage 5: Tighten a second time to 115 INB/LBS (13 Nm). Repeat Stage 5, if any fastener moves more than 5 degrees in Stage 5. NOTICE: Failure to install the oil spray bar in steps may result in damage to the oil spray bar. Install the right-hand oil spray bar, turn the nuts 2 revolutions at a time in the sequence shown in Figure 1 until the oil spray bar nuts can be tightened. Tighten the nuts in sequence to 89 IN/LBS (11 Nm).