Performance and noise analysis of vibratory feeder using dynamic rubber spring model

摘要

In vibratory feeder, material feeding occurs due to the vibration of a trough mounted on helical springs. High vibration amplitude of trough causes the springs to jump and usually results in higher noise level generation and increase in force transmissibility in the support structure of the feeder. Reducing this noise without having significant changes in the dynamics of the feeder unit is a major challenge in the present industries. This paper presents a dynamic rubber spring model for vibratory feeders to reduce the noise level and the force transferred to the support structure of the feeder. Measurement of dynamic parameters such as vibration amplitude and magnitude of force transmitted to support structure, noise level, and conveying speed of particle analyses have been conducted experimentally on vibratory feeder with and without rubber gasket installed at spring support structure. The use of rubber gaskets at spring supports and their implication on force transmissibility and noise level of feeder is established experimentally. The performance analysis of feeder was also conducted using particle conveying speed on trough for different setups of feeder unit. It was found that the introduction of rubber gaskets at spring supports of the feeder increases the system damping, which helps in noise reduction as well as reduced amplitude of vibration and higher acceleration of trough. The increased acceleration leads to higher particle conveying velocity on the feeder trough.