An integrated PMU architecture for power system applications

摘要

Time synchronized phasors obtained using Phasor Measurement Units (PMU) spread across wide areas have revolutionized power system monitoring and control. These synchronized measurements must be accurate and fast in order to comply with the latest IEEE standards for synchrophasor measurements. The speed at which a PMU provides an output depends on the group delay associated with that PMU and the permissible group delay in-turn decides the utility of a PMU for either control or measurement application. Based on the group delay compensation techniques, in the literature, two individual types of PMUs, such as causal and non-causal PMUs have been introduced. This paper presents an approach where both causal and non-causal PMUs are combined in an integrated PMU architecture. This method not only illustrates the group delay performance of two PMUs in a single module, but also can be used for multiple functions. In this environment several PMU algorithms have been compared with respect to their group delays and their effect on the response time. Application of the integrated PMU architecture to a four-machine 10-bus power system has been demonstrated using a six-input PMU with three-phase voltage and current signals as inputs. Different causal compensation schemes are introduced due to the availability of voltage and current-based frequency and ROCOF signals. Impact of these compensation schemes on PMU accuracy is evaluated through the Total Vector Error (TVE) index. The influence of these compensation schemes on measurements like power and impedance is also investigated. Finally, outputs from the integrated PMU architecture are fed into a Power System Stabilizer (PSS) to control the small-signal stability performance of a power system during dynamic conditions.