? 2022 Elsevier LtdInternal mass transfer coefficient is considered as a key parameter for open thermochemical sorption heat storage which usually has a large margin between theoretical and actual value. This paper aims to analyze the role of mass transfer on system performance prediction. Al2O3 and LiCl composite sorbents are prepared and adsorption behavior is tested through a thermal gravimetric analyzer and a small-scale air duct experiment. An equation of kinetic coefficient is fitted to describe adsorption process more accurate than empirical equation. For simulation, a one-dimensional model is established based on dimensionless number of heat and mass transfer, and similarity theory is built to predict output parameters. Results indicate that the sorbent with 16.44 salt content reaches 0.39 g·g?1 maximum water uptake on the condition of 20 °C, 80 relative humidity. It is indicated that the system using composite sorbents has a heat storage density of 345.58 kWh·m?3. Parameters that influence system output power and duration are also investigated. By adjusting air flow rate and sorption length of sorption reactor, the system can achieve temperature rise of 30 °C at the exit and a steady output of 6 h. One striking fact is that mass transfer coefficient can be used to well predict the performance of real open adsorption thermal energy storage system which is also conducive to system design and optimization.
展开▼
