首页> 外文期刊>Optical fiber technology >High-sensitive fiber-optic pressure sensor based on Fabry-Perot interferometer filled with ultraviolet glue film and Vernier effect
【24h】

High-sensitive fiber-optic pressure sensor based on Fabry-Perot interferometer filled with ultraviolet glue film and Vernier effect

机译:基于法布里-珀罗干涉仪的高灵敏度光纤压力传感器,填充紫外胶膜和游标效应

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

A high sensitivity fiber-optic pressure sensor based on Fabry-Perot interferometer filled with ultraviolet (UV) glue film and Vernier effect was proposed and demonstrated. The sensor is composed of a sensing Fabry-Perot (FP) cavity and a reference FP cavity in parallel. The sensing cavity is fabricated by splicing a section of silica tube (ST) to the lead-in single-mode fiber (SMF), and filling a thin layer of UV glue at the end-face of the ST. The reference cavity is made by sandwiching a section of ST between two SMF. The parallel cavities generate the Vernier effect due to a similar free spectrum range, which significantly improves the sensitivity of the sensor. The proposed sensor with good repeatability and reliability was used to monitor the change of air pressure, and provided a high sensitivity of -38.3 nm/MPa. The sensor exhibited the potential applications in the fields of aerospace industry, biological diagnostics and environmental monitoring.
机译:提出并演示了一种基于法布里-珀罗干涉仪的高灵敏度光纤压力传感器,该传感器填充了紫外胶膜和游标效应。该传感器由一个传感法布里-珀罗 (FP) 腔和一个平行的参考 FP 腔组成。传感腔是通过将一段二氧化硅管 (ST) 拼接到引入式单模光纤 (SMF) 上,并在 ST 端面填充一层薄薄的 UV 胶来制造的。参考腔是通过在两个 SMF 之间夹一段 ST 制成的。平行腔由于具有相似的自由光谱范围而产生游标效应,这显着提高了传感器的灵敏度。该传感器具有良好的重复性和可靠性,用于监测气压变化,灵敏度高达-38.3 nm/MPa。该传感器在航空航天工业、生物诊断和环境监测等领域具有潜在的应用前景。

著录项

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号