A review of the different fabrication techniques of porous Mg structures considering the effect of manufacturing parameters on corrosion rate and mechanical properties in the bio application

摘要

Abstract In recent years, more attention to unique and complex structures, such as nature-inspired and porous structures for medical applications, has been strongly developed. Open-cell porous metal-based ones display more benefits than rigid ones since they facilitate the transformation of load between the bone and the implants and avoid the phenomenon of stress shielding and bone resorption. By being biodegradable and non-toxic, as well as having lower density and mechanical properties close to those of natural bone, Mg and its alloys are considered promising materials for porous scaffolds. However, a high corrosion rate is the main drawback of Mg alloys. The porosity of porous structures can also worsen it as it enhances the surface area exposed to the corrosive solution and negatively impacts the performance of porous structures, that these issues have not been addressed in detail so far. Since fabrication methods of Mg-based scaffolds can significantly affect the porosity-related properties (e.g., porosity percentage, type, size, and geometry) and, consequently, scaffolds’ mechanical behavior and corrosion resistance, this paper reviews and compares the fabrication methods of porous structures and how they affect the resultant properties. However, among different methods, due to the expansion of additive manufacturing as a novel and exciting manufacturing technique, the paper’s central focus is on using additive manufacturing in biomedical applications, discussing its advantages over other techniques. The effect of geometrical parameters on mechanical properties and corrosion rate, which strongly affects bio-application, are also given. Moreover, different strategies are briefly introduced for tailoring the high corrosion rate of Mg and its alloys, such as alloying elements and coatings. However, there is still less information regarding the additive manufacturing of porous Mg scaffolds and the optimum way of controlling the corrosion rate of Mg-based parts.