This work presents a simple broadband polarization‐insensitive circuit analog absorber (CAA) with wide angular stability. It comprises of dual‐cut square loop resonator loaded with eight lumped resistors as top patch and an inductive grid. The normal incidence reveals a 90 absorption bandwidth of 20.51 GHz (110 fractional bandwidth) covering the entire X to K‐band with a minimum flat absorption rate of 92.82. Equivalent circuit analysis is carried out, and responses are validated with full‐wave simulations. The proposed prototype is insensitive to different polarization angles under normal incidence and stable with 45° in transverse electric (TE) and transverse magnetic (TM) incidences. The design's novelty lies in using two resistors on each side of the square ring, which improves the absorptivity performance. The inductive grid enhances TM mode's angular stability. The proposed absorber is fabricated, and the measured results are in good agreement. In‐band bistatic radar cross section reduction of 12.97 dBsm is obtained with the absorber using an X‐band antenna. The temperature profile of the prototype is illustrated using near‐in‐lock infrared thermography, and 2.1°F of temperature rise is noticed in the absorption band. The proposed structure possesses a low profile, broad bandwidth, polarization insensitivity, and wide angular stability to the best of the author's knowledge.
展开▼
