...
首页> 外文期刊>Applied physics letters >Controllable 2H/3R phase transition and conduction behavior change in MoSe2:Nb substitution by high pressure synthesis for promising thermoelectric conversion
【24h】

Controllable 2H/3R phase transition and conduction behavior change in MoSe2:Nb substitution by high pressure synthesis for promising thermoelectric conversion

机译:高压合成取代MoSe2:Nb的可控2H/3R相变和传导行为变化

获取原文
获取原文并翻译 | 示例

摘要

Transition metal dichalcogenides (TMDs) are uniquely multifunctional materials with optical, electronic, and catalytic properties. Despite the advantages of low cost, low toxicity, and high abundance, the thermoelectric transport properties of MoSe2 were not extensively investigated. Meanwhile, MoSe2 bulk material with 3R phase was rarely reported compared to 2H phase. In this work, controllable phase transition from 2H to 3 R for MoSe2 bulk polycrystalline material was achieved with various Nb contents by a simple and feasible high-pressure method. The preferred orientation resulted in anisotropy of both electrical and thermal transport. The samples converted from n type for pristine sample to p type conduction after Nb doping. Meanwhile, the conduction type gradually changed from semiconductor to degenerated semiconductor. The electrical properties were distinctly improved by Nb doping systematically from the reduced bandgap and the enhanced carrier concentration and mobility. The lattice thermal conductivity was reduced by point defects and grain/phase boundaries generating from Nb doping. Maximum zT of 0.17 at 873 K was obtained for Nb0.04Mo0.96Se2, which is among the highest values for Te-free Mo dichalcogenides. The strategy of chemical doping and high-pressure synthesis provides an alternative route to achieve MoSe2 bulk materials with a controllable 2H/3R phase ratio for potential applications, which can be extended to other TMDs.
机译:过渡金属硫族化合物 (TMD) 是独特的多功能材料,具有光学、电子和催化性能。尽管具有低成本、低毒性和高丰度等优点,但MoSe2的热电输运特性尚未得到广泛研究。同时,与2H相相比,3R相的MoSe2块体材料很少被报道。本工作采用简单可行的高压方法,实现了不同Nb含量的MoSe2块体多晶材料从2H到3 R的可控相变。优选取向导致电传输和热传输的各向异性。Nb掺杂后,样品从原始样品的n型转换为p型传导。同时,导通型逐渐从半导体转变为简并半导体。Nb掺杂通过减小带隙、提高载流子浓度和迁移率系统地改善了电学性能。Nb掺杂产生的点缺陷和晶界/相界降低了晶格热导率。Nb0.04Mo0.96Se2在873 K时的最大zT为0.17,是无Te硫化钼的最高值之一。化学掺杂和高压合成的策略为实现具有可控的2H/3R相比的MoSe2块体材料提供了另一条途径,可用于其他TMD。

著录项

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号