This study investigates the ignition and combustion characteristics of interacting diesel pilot and hydrogen (H2) jets under simulated compression-ignition engine conditions. Two converging single-hole injectors were used to inject H2 and diesel-pilot jets into an optically accessible constant-volume combustion chamber (CVCC). The parameters varied include fuel injection sequence, timing between injections, and ambient temperature (780-890 K). The results indicate that when diesel-pilot is injected before H2, with increasing time separation, the burnt diesel products mix and cool down, requiring longer jet-jet interaction to ignite the H2 jet. When H2 is injected before diesel-pilot, the H2-air mixing amount prior to pilot-fuel igniting impacts the combustion spreading through the H2 jet. If ignition of the H2 jet occurs beyond its end-of-injection (EOI), the H2 mixture zone where the pilot-diesel interacts with becomes too lean for combustion. At lower ambient temperatures, the combustion variability increases, attributed to the diesel-pilot lean out.(c) 2022 The Authors. Published by Elsevier Ltd on behalf of Hydrogen Energy Publications LLC. This is an open access article under the CC BY-NC-ND license (http:// creativecommons.org/licenses/by-nc-nd/4.0/).
展开▼
