Supersonic particle bombardment of additive manufactured Ti6Al4V-induced gradient microstructure with prominent tribology and corrosion resistance

摘要

Abstract The effects of supersonic particle bombardment (SFPB) on the microstructure, microhardness and wear property of Ti6Al4V alloy prepared by laser metal deposition (LMD) were investigated in this paper. The electrochemical corrosion behaviors of the LMDed Ti6Al4V alloy samples before and after SFPB treatment in 3.5% NaCl solution were measured. The results showed that a gradient severe deformation layer of ~ 350 μm thickness was formed with refined equiaxed grains oriented in various directions on the surface of LMDed Ti6Al4V alloy after SFPB treatment. The microhardness of the deformation layer was significantly increased due to the plastic deformation, grain refinement, dislocations and deformation twins increment. After SFPB treatment, the LMDed Ti6Al4V exhibited higher wear resistance which is about 55.6% decrease in wear loss than that of the untreated sample. Moreover, the corrosion resistance and corrosion rate of the SFPB-treated samples in 3.5% NaCl solution improved due to the finer hexagonal grains and high density of grain boundary in the severe deformation layer.