Profiling cross-sectional area of a radial rotating detonation combustor to increase pressure gain

摘要

The detonation wave(s) in a rotating detonation combustor (RDC) produce highly unsteady flow with varying supersonic and subsonic segments. The non-homogeneous RDC flow must be conditioned to improve its uniformity, which can increase the performance and operation of the downstream hardware for propulsion and power generation applications. In this study, the RDC channel and converging nozzle are combined into a single flow conditioning device, and Gradual to rapid (GTR), Linear, and Rapid to Gradual (RTG) strategies to profile the cross-sectional area of the combined channel are introduced. An inward flowing disk-RDC (D-RDC) operated on gaseous methane-oxygen is numerically investigated using a quasi-two-dimensional computational fluid dynamic (CFD) simulation with a curvilinear coordinate system. The study focuses on the combined channel to isolate the effects of area profiling and neglects radial to axial turning of the flow necessary to integrate it, for example, with an aerospike nozzle located downstream. Simulations show that the RTG area profile yields a higher performance compared to GTR and Linear cases. The RTG profile is also shown to improve pressure and temperature uniformity of the RDC flow at the throat. Results are analyzed to show that a rapid decrease in the cross-sectional area closer to the detonation for the RTG profile improves the stability of the detonation process and constrains the expansion of product gases behind detonation to orient the flow radially inwards. Therefore, profiling the cross-sectional area of an RDC can be vital in improving the operability and effective integration of the downstream hardware.