In Vitro Study of a Stentless Aortic Bioprosthesis Made of Bacterial Cellulose

摘要

Abstract Purpose The paper present findings from an in vitro experimental study of a stentless human aortic bioprosthesis (HAB) made of bacterial cellulose (BC). Three variants of the basic model were designed and tested to identify the valve prosthesis with the best performance parameters. The modified models were made of BC, and the basic model of pericardium.Methods Each model (named V1, V2 and V3) was implanted into a 90 mm porcine aorta. Effective Orifice Area (EOA), rapid valve opening time (RVOT) and rapid valve closing time (RVCT) were determined. The flow resistance of each bioprosthesis model during the simulated heart systole, i.e. for the mean differential pressure (ΔP) at the time of full valve opening was measured. All experimental specimens were exposed to a mean blood pressure (MBP) of 90.5?±?2.3 mmHg.Results The V3 model demonstrated the best performance. The index defining the maximum opening of the bioprosthesis during systole for models V1, V2 and V3 was 2.67?±?0.59, 2.04?±?0.23 and 2.85?±?0.59 cm2, respectively. The mean flow rate through the V3 valve was 5.7?±?1, 6.9?±?0.7 and 8.9?±?1.4 l/min for stroke volume (SV) of 65, 90 and 110?mL, respectively. The phase of immediate opening and closure for models V1, V2 and V3 was 8, 7 and 5% of the cycle duration, respectively. The mean flow resistance of the models was: 4.07?±?2.1, 4.28?±?2.51 and 5.6?±?2.32 mmHg.Conclusions The V3 model of the aortic valve prosthesis is the most effective. In vivo tests using BC as a structural material for this model are recommended. The response time of the V3 model to changed work conditions is comparable to that of a healthy human heart. The model functions as an aortic valve prosthesis in in vitro conditions.