首页> 外文期刊>Mathematical Problems in Engineering: Theory, Methods and Applications >Performance Evaluation of Different Control Methods for an Underactuated Quadrotor Unmanned Aerial Vehicle (QUAV) with Position Estimator and Disturbance Observer
【24h】

Performance Evaluation of Different Control Methods for an Underactuated Quadrotor Unmanned Aerial Vehicle (QUAV) with Position Estimator and Disturbance Observer

机译:基于位置估计器和扰动观测器的欠驱动四旋翼无人机(QUAV)不同控制方法的性能评估

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

The main aim of this manuscript is to design and demonstrate the performance of different control algorithms with position estimator and disturbance observer to track the helical trajectory by an underactuated quadrotor craft under the influence of unmodelled dynamic factors and external disturbances. The manuscript consists of the derivations related to the kinematics and dynamics of quadrotor dully derived using the Newton Euler approach. It is one of the strenuous tasks to stabilize and control the quadrotor for helical trajectory tracking since it is an underactuated mechatronic system. In addition to this, with inclusion of unmodelled dynamic factors, it faces some of the serious transient and steady-state issues including Zeno noise. In this research manuscript, dual-loop single-dimension fuzzy sliding mode control (DLSDF-SMC) is proposed to improve the helical trajectory tracking performance, and to tackle the unmodelled dynamic factors, a state feedback controller is proposed consisting of a position estimator and disturbance observer design. The entire system is distributed into two subsystems such that within the angular subsystem, the attitude control is proposed using DLSDF-SMC, and for the translational subsystem, the paper proposes the position control design based on the hyperbolic function to avoid the gimbal lock issue. The overall stability of the proposed closed-loop control scheme is also proved. The simulation work for the proposed algorithm is performed using MATLAB and Simulink software and compared with the conventional sliding mode control (SMC) and fuzzy-based SMC control designs. This work demonstrates that the DLSDF-SMC control technique with position estimator and disturbance observer design in feedback not only improves the aggressive maneuvers while tracking the helical trajectory but also tackles the transient and steady-state issues.
机译:本文的主要目的是设计和演示具有不同控制算法的性能,包括位置估计器和扰动观测器,以跟踪欠驱动四旋翼飞行器在未建模的动态因素和外部扰动的影响下的螺旋轨迹。该手稿包括与使用牛顿欧拉方法直接推导的四旋翼飞行器运动学和动力学相关的推导。稳定和控制四旋翼飞行器以进行螺旋轨迹跟踪是一项艰巨的任务,因为它是一个驱动不足的机电一体化系统。除此之外,由于包含未建模的动态因素,它面临着一些严重的瞬态和稳态问题,包括芝诺噪声。为提高螺旋轨迹跟踪性能,提出了一种由位置估计器和扰动观测器设计组成的状态反馈控制器,提出了一种由位置估计器和扰动观测器设计组成的双环一维模糊滑模控制(DLSDF-SMC)算法。整个系统分布在两个子系统中,在角度子系统中,提出了使用DLSDF-SMC的姿态控制,针对平移子系统,提出了基于双曲线函数的位置控制设计,以避免云台锁定问题。还验证了所提闭环控制方案的整体稳定性。利用MATLAB和Simulink软件对所提算法进行了仿真工作,并与传统的滑模控制(SMC)和基于模糊的SMC控制设计进行了比较。该研究表明,采用位置估计器和扰动观测器反馈设计的DLSDF-SMC控制技术不仅改善了在跟踪螺旋轨迹时的主动机动,而且解决了瞬态和稳态问题。

著录项

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号