...
首页> 外文期刊>Journal of optical technology >Characteristics of various sensor devices for a miniature resonant optical gyroscope
【24h】

Characteristics of various sensor devices for a miniature resonant optical gyroscope

机译:微型谐振光学陀螺仪的各种传感器器件的特性

获取原文
获取原文并翻译 | 示例

摘要

Subject of study. Using a ring resonator as an example, this paper describes the general operating principle for optical resonators, the characteristics of such resonators, and the relationship between resonator quality factor Q and gyroscope sensitivity. Several sensor devices (optical resonators) were compared for use in the development of a miniature resonant optical gyroscope. These optical resonatorswere of three different types: a fiber-optic resonator, a whispering gallery mode resonator, and an integrated optical resonator ring. Methodology. The fiber-optic resonator consists of two fiber-optic splitters spliced together, the whispering gallery mode resonator consists of a three-dimensional dielectric structure in which whispering gallery modes are excited, and the integrated optical resonator ring consists of an optical waveguide and closed loop mounted on a common substrate. The characteristics of the high-Q (Q = 10(6) - 10(9)) whispering gallery mode resonators and fiber-optic resonators were measured using a narrow-band scanning laser and an oscillograph. A simpler approach, with a broadband laser source and an optical spectrum analyzer, was used for the low-Q (Q < 10(6)) integrated optical resonators. Main results. Values of Q = (5.2 x 10(8), Q = 4.3 x 10(6), and Q = 1.1 x 10(4) were obtained for a MgF2 disk resonator, fiber-optic disk resonator, and integrated optical resonator, respectively. Practical significance. The whispering gallery mode resonator turns out to be the most promising of these sensor devices since it has the highest Q and the highest accuracy for angular velocity measurements. Fiber optic resonators are competitive but are more sensitive to temperature and external mechanical effects. Integrated optical resonators have the advantage of miniaturization and the ability to include temperature stabilization components and components that provide resistance to mechanical effects. (C) 2022 Optica Publishing Group.
机译:研究主题。本文以环形谐振器为例,阐述了光学谐振器的一般工作原理、该谐振器的特性以及谐振器品质因数Q与陀螺仪灵敏度的关系。比较了几种传感器器件(光学谐振器)在开发微型谐振光学陀螺仪时的使用。这些光谐振器有三种不同的类型:光纤谐振器、耳语廊模式谐振器和集成光谐振器环。方法论。光纤谐振器由两个光纤分路器拼接在一起组成,耳语廊模式谐振器由激发耳语廊模式的三维介质结构组成,集成光谐振器环由安装在公共基板上的光波导和闭环组成。采用窄带扫描激光器和示波器测量了高Q值(Q = 10(6) - 10(9))耳语廊模式谐振器和光纤谐振器的特性。低Q值(Q < 10(6))集成光谐振器采用了一种更简单的方法,即宽带激光源和光谱分析仪。主要结果。分别获得了MgF2圆盘谐振器、光纤圆盘谐振器和集成光谐振器的Q = (5.2 x 10(8)、Q = 4.3 x 10(6)和Q = 1.1 x 10(4)的值。现实意义。耳语画廊模式谐振器被证明是这些传感器设备中最有前途的,因为它具有最高的 Q 值和最高的角速度测量精度。光纤谐振器具有竞争力,但对温度和外部机械效应更敏感。集成光学谐振器具有小型化的优点,并且能够包括温度稳定元件和抗机械效应的元件。(C) 2022 Optica 出版集团。

著录项

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号