Investigating Enhanced Oil Recovery in Unconventional Reservoirs Based on Field Case Review, Laboratory, and Simulation Studies

摘要

Aimed at advancing gas injection enhanced oil recovery (EOR) technologies in unconventional reservoirs, this study comprised a series of activities to bridge the gap between the theoretical study and actual field applications. Twenty-four EOR pilot tests were collected from the major unconventional plays in North America to evaluate the performance of different EOR technologies. Fit-for-purpose experiments and simulations were performed to investigate the effects of injection rate and pressure on EOR performance, as well as to reveal the effectiveness of huff "n" puff (HnP) cycles in actual field operations. The selection of injection rate and pressure as key parameters for investigation was based on field observations and communications with oil and gas operators because these two parameters play critical roles in both facility design and overall cost for an EOR project. Results showed that miscible EOR with a high gas injection rate and pressure is required for field operations because the injected gas needs to penetrate and extract oil from the tight matrix. Experimental results indicated that there is a correlation between oil recovery and the logarithm of core volume for miscible EOR. Immiscible gas EOR could not yield a satisfactory EOR response in actual reservoirs because the injected gas tends to flow through fractures instead of penetrating the matrix to interact with oil. Results also showed that reaching minimum miscibility pressure (MMP) does not guarantee an optimum EOR operation in unconventional reservoirs. Pressure higher than MMP is preferred in field operations. When designed properly, up to a tenfold oil production rate boost is achievable in field applications within a short period. However, such a high-performance operation is only effective in the first several HnP cycles due to the limited gas penetration depth into the rock matrix.