Assembly-level analyses of accident-tolerant cladding concepts for a long-life civil marine SMR core using micro-heterogeneous duplex fuel

摘要

In this reactor physics study, we examine the neutronic performance of accident-tolerant fuel (ATF) claddings – austenitic type 310 stainless steel (310SS), ferritic Fe-20Cr-5Al (FeCrAl), advanced powder metallurgic ferritic (APMT), and silicon carbide (SiC)-based materials – as alternative cladding materials compared with Zircaloy-4 (Zr) cladding. The cores considered use 18%235U enriched micro-heterogeneous ThO2-UO2duplex fuel and, for purposes of comparison, 15%235U enriched homogeneously mixed all-UO2fuel, loaded into 13×13 pin arrays. A constant cladding coating thickness of 655?μm is assumed. We use the WIMS reactor physics code to analyse the associated reactivity, achievable discharge burnup, spectral variations, rim effect and reactivity feedback parameters for the candidate cladding materials at the assembly level.The results show that candidate fuels with 310SS cladding exhibit a～13% discharge burnup penalty compared to Zr due to the presence of a very high nickel (Ni) concentration. The high neutron absorption cross-sections of iron (Fe) in the FeCrAl and APMT claddings also lead to a～10% discharge burnup penalty. The fuels with SiC cladding can achieve a～1% higher discharge burnup compared to Zr due to the low thermal neutron absorption cross-sections of its constituents and the softer neutron spectrum. The claddings with lower capture cross-sections (SiC and Zr) exhibit higher relative fission power at the pellet periphery. For both candidate fuels, the end-of-life239Pu (for UO2fuel) and233U (for duplex fuel) inventories are higher for the claddings (Fe-based: FeCrAl, APMT and steel-based: 310SS) with higher thermal capture cross-sections, unlike for SiC and Zr, where SiC provides higher end-of-life239Pu and233U inventories despite having lower capture cross-section than that of the Zr. Reactivity feedback parameter values (moderator and fuel temperature coefficients) are more negative for the duplex fuel than the UO2fuel for all the candidate claddings, with claddings with harder spectra exhibiting more negative values. The duplex fuel yields a softer spectrum than the UO2fuel with the candidate claddings, which improves neutron economy and thus discharge burnup.