Task‐based configuration control of redundant manipulators

摘要

AbstractThis article establishes new goals for redundancy resolution based on manipulator dynamics and end‐effector characteristics. These goals can be accomplished by employing the recently developed configuration control approach. Redundancy resolution is achieved by controlling the joint inertia matrix or the end‐effector mass matrix that affect the inertial torques or by reducing the joint torques due to gravity loading and payload. The manipulator mechanical advantage and velocity ratio are also used as performance measures to be improved by proper utilization of redundancy. Furthermore, end‐effector compliance, sensitivity, and impulsive force at impact are introduced as redundancy‐resolution criteria. The new goals for redundancy resolution presented in this article allow a more efficient utilization of the redundant joints based on the desired task requirements. Simple case studies using computer simulations are described for illus