Effect of Nozzle Selection and Spray Volume on Droplet Size and Efficacy of Engenia Tank-Mix Combinations

摘要

Sprayer applicator-controlled variables, such as nozzle selection and spray volume, will become increasingly important for making labeled POST applications of dicamba in next-generation cropping systems. A field experiment was conducted in 2013 and 2014 at the Northeast Research and Extension Center in Keiser, AR. Tank mixtures of Engenia (a new form of dicamba), glyphosate, glufosinate, and S-metolachlor were applied with TeeJet AIXR, AITTJ60, and TTI nozzles. Two nozzle sizes, 11003 and 11006, were used to vary spray volume from 94 L ha(-1) to 187 L ha(-1), respectively. For barnyardgrass, a significant decrease in control was observed when spray volume was reduced for glyphosate + dicamba in 2013. In 2014, an overall decrease in control was observed for the TTI nozzle when spray volume was reduced to 94 L ha(-1), averaged across all herbicide treatments. The addition of the product S-metolachlor to glyphosate + glufosinate + dicamba significantly reduced the droplet spectra for all nozzle types. For example, adding S-metolachlor into the tank-mix decreased the volume median diameter (D-v50) for the TTI nozzle at 187 L ha(-1) spray volume from 789 mu m to 570 mu m. The results from this research demonstrate that using low spray volume and coarser nozzles could reduce efficacy of the herbicides on the weed species evaluated. Nozzle selection and spray volume have key roles in maximizing efficacy of POST applications in dicamba-resistant crops. Additionally, evaluating droplet spectra of potential dicamba-containing tank-mixtures is critical for producing the desired droplet size to minimize off-target movement.