首页> 外文期刊>Journal of the European Ceramic Society >Enhanced microwave absorbance of oxidized SiCf /AlPO4 composites via the formation of a carbon layer on the SiC fibre surface
【24h】

Enhanced microwave absorbance of oxidized SiCf /AlPO4 composites via the formation of a carbon layer on the SiC fibre surface

机译:通过在SiC纤维表面上形成碳层来增强氧化SICF / ALPO4复合材料的微波吸光度

获取原文
获取原文并翻译 | 示例
           

摘要

A single-layer radar-absorbing structure active in the X-band (8.2 GHz to 12.4 GHz) was demonstrated by blending SiC fibres with an AlPO4 matrix material. The as-prepared SiCf/AlPO4 composites were oxidized at 1273 K for several hours to investigate the effects of oxidation on the dielectric and wave-absorbing properties. Scanning and transmission electron microscopy were used to characterize the morphology and microstructure of the composites. The AlPO4 -SiO2 solid solution during oxidation promoted the formation of a complete carbon layer on the SiC fibre surface. The real and imaginary parts of the SiCf/AlPO4 composites increased from 4.2-4.4 to 5.9-7.1 and from 0.08-0.2 to 3.9-5.2, respectively, with increasing oxidation time from 0 to 10 h, respectively. When the thickness of the composites increased from 2.9 mm to 3.3 mm, the wave-absorbing property noticeably improved due to the formation of a carbon layer on the SiC fibre surface after oxidation.
机译:通过将SiC纤维与AlPO4基体材料混合,证明了一种在X波段(8.2 GHz至12.4 GHz)具有活性的单层雷达吸收结构。将制备的SiCf/AlPO4复合材料在1273K下氧化数小时,以研究氧化对介电和吸波性能的影响。利用扫描电镜和透射电镜对复合材料的形貌和微观结构进行了表征。氧化过程中的AlPO4-SiO2固溶体促进了碳化硅纤维表面形成完整的碳层。随着氧化时间从0小时增加到10小时,SiCf/AlPO4复合材料的实部和虚部分别从4.2-4.4增加到5.9-7.1和从0.08-0.2增加到3.9-5.2。当复合材料的厚度从2.9mm增加到3.3mm时,由于氧化后在SiC纤维表面形成碳层,吸波性能显著提高。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号