...
首页> 外文期刊>Journal of endourology >How Lasers Ablate Stones: In Vitro Study of Laser Lithotripsy (Ho:YAG and Tm-Fiber Lasers) in Different Environments
【24h】

How Lasers Ablate Stones: In Vitro Study of Laser Lithotripsy (Ho:YAG and Tm-Fiber Lasers) in Different Environments

机译:激光如何消融石:在不同环境中的激光碎石(HO:YAG和TM-Fiber Lasers的体外研究

获取原文
获取原文并翻译 | 示例

摘要

Introduction: There are two main mechanisms of stone ablation with long-pulsed infrared lasers: photothermal and photomechanical. Which of them is primary in stone destruction is still a matter of discussion. Water holds importance in both mechanisms but plays a major role in the latter. We sought to identify the prevailing mechanism of stone ablation by evaluating the stone mass loss after lithotripsy in different media. Materials and Methods: We tested a holmium:yttrium-aluminum-garnet (Ho:YAG) laser (100 W; Lumenis), a thulium-fiber laser U1 (TFL U1) (120 W; NTO IRE-Polus, Russia), and a SuperPulse thulium-fiber laser U2 (TFL U2) (500 W; NTO IRE-Polus). A single set of laser parameters (15 W = 0.5 J x 30 Hz) was used. Contact lithotripsy was performed in phantoms (BegoStones) in different settings: (a) hydrated phantoms in water, (b) hydrated phantoms in air, (c) dehydrated phantoms in water, and (d) dehydrated phantoms in air. Laser ablation was performed with total energy of 0.3 kJ. Phantom mass loss was defined as the difference between the initial phantom mass and the final phantom mass of the ablated phantoms. Results: All lasers demonstrated effective ablation in hydrated phantoms ablated in water; no visual differences between the lasers were detected. The ablation of dehydrated phantoms in air was also effective with visible vapor during ablation and condensation on the cuvette wall. Dehydrated phantoms in water and in air show minimal to no ablation accompanied with formation of white crust on phantom surface. Among laser types, TFL U2 had the highest phantom mass loss in all groups except for dehydrated phantoms ablated in air. Conclusions: Our results suggest that both photothermal and thermomechanical ablation mechanisms (explosive vaporization) occur in parallel during laser lithotripsy. In Ho:YAG and TFL U2 stone ablation explosive vaporization prevails, whereas in TFL U1 ablation photothermal mechanism appears to predominate.
机译:引言:长脉冲红外激光烧蚀结石的主要机制有两种:光热和光机学。它们中哪一个是石头破坏的主要原因仍然是一个讨论的问题。水在这两种机制中都很重要,但在后者中起着重要作用。我们试图通过评估不同介质中碎石后的结石质量损失来确定结石消融的主要机制。材料和方法:我们测试了钬:钇铝石榴石(Ho:YAG)激光器(100W;Lumenis)、铥光纤激光器U1(TFL U1)(120W;俄罗斯NTO IRE Polus)和超脉冲铥光纤激光器U2(TFL U2)(500W;NTO IRE Polus)。使用一组激光参数(15 W=0.5 J x 30 Hz)。在不同的环境下对模型(BegoStones)进行接触碎石:(a)水化模型在水中,(b)水化模型在空气中,(c)脱水模型在水中,以及(d)脱水模型在空气中。激光消融的总能量为0.3kJ。模型质量损失定义为消融模型的初始模型质量和最终模型质量之间的差异。结果:所有激光均能有效地消融在水中消融的含水体模;没有检测到激光之间的视觉差异。在烧蚀和反应杯壁冷凝过程中,在空气中烧蚀脱水的幻影时,可见蒸汽也有效。在水中和空气中脱水的模型显示出最小或没有烧蚀,并在模型表面形成白色外壳。在所有激光类型中,TFL U2在所有组中的体模质量损失最高,但在空气中烧蚀的脱水体模除外。结论:我们的结果表明,光热和热机械消融机制(爆炸性汽化)在激光碎石术中同时发生。在Ho:YAG和TFL U2结石烧蚀中,爆炸性汽化占主导地位,而在TFL U1中,光热烧蚀机制似乎占主导地位。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号