Additive manufacturing of novel ferritic stainless steel by selective laser melting: Role of laser scanning speed on the formability, microstructure and properties

摘要

Novel ferritic stainless steel was successfully fabricated by selective laser melting (SLM) technology. This study was dedicated to the effect of laser scanning speed on the formability, microstructural evolution, wear and corrosion performance of SLM novel stainless steel. The results showed that the densification level of the SLM specimens was significantly improved with the increase of laser energy density due to the reduction in pore defects. The microstructure of the SLM specimens was mainly composed of ?-Fe, with a small amount of Cr23C6. The EBSD pattern of the SLM specimens showed anisotropy due to complex thermal convection in the SLM process. The proportion of the LAGBs and ?-Fe increased with the increase of laser scanning speed while the average grain size decreased from 0.481 to 0.467 ?m. The SLM specimens possessed excellent properties, with the corrosion resistance significantly higher than that of some common engineering alloys. The best SLM specimen possessed a corrosion potential of -148 mV SCE, a corrosion current density of 1.38 x 10-7 A cm-2, microhardness of 812 HV, and a specific wear rate of 1.99 x 10-6 mm3/Nm.