Extraction method of composite fault features of gear transmission system based on demodulation of NMD and Teager energy operators

摘要

In order to effectively identify and extract the composite fault characteristics of the gear transmission system, a composite fault diagnosis method combining nonlinear mode decomposition (NMD) and Teager energy operator demodulation is proposed. Because the envelope demodulation of Hilbert transform has the disadvantages of large amount of calculation and end effect, it uses Teager energy operator to solve the problem of large amount of calculation, and NMD solves the problem that the fault signal features is not easy to extract under the mode aliasing. First, the NMD method is used to decompose the fault simulation signal, and the nonlinear modal component with practical physical significance is obtained. Secondly, the Teager energy operator demodulation is carried out for the nonlinear modal components, and the demodulation results are analyzed to verify the feasibility of the method. Then, the method is applied to the composite fault diagnosis of gear pitting wear in gear transmission system, and the characteristic frequency obtained from the test data is compared with the calculated characteristic frequency. The comparative analysis shows that the method can separate the fault characteristic frequencies of large and small gears. The comparative analysis with EMD and EEMD methods in simulation signal analysis and experimental research shows that this method is superior.