...
首页> 外文期刊>Designed Monomers and Polymers: An International Journal on Monomer and Macromolecular Synthesis >Synthesis and characterization of semiaromatic copolyamide 10T/1014 with high performance and flexibility
【24h】

Synthesis and characterization of semiaromatic copolyamide 10T/1014 with high performance and flexibility

机译:具有高性能和柔韧性的半导体共聚酰胺10T / 1014的合成与表征

获取原文
获取原文并翻译 | 示例
           

摘要

Poly (decamethylene terephthalamide) (PA10T) is a kind of engineering plastics with high strength and high modulus, but one of its disadvantages is its low elongation at break. In order to improve the flexibility of PA10T, one aliphatic comonomer with a long alkyl chain is introduced to the molecular chain of PA10T. Then long chain semiaromatic copolyamides 10T/1014 were synthesized with different contents of 1014 units by polycondensation reaction of 1,10-diaminodecane, terephthalic acid and 1,12-dodecanedicarboxylic acid in deionized water. The intrinsic viscosities of the resultant polyamides ranged from 0.90 to 1.03 dL/g were obtained. The chemical and crystal structures of the copolymers were characterized by FTIR, H-1-NMR and WAXD. These copolyamides exhibited outstanding thermal properties with melting points range of 306-295 degrees C and degradation temperatures range of 479-472 degrees C at maximum degradation rate, and also have a wider processing window than PA10T. The tensile strength of PA10T/1014 copolymers decreased gradually from 80.02 to 72.95MPa as the content of 1014 units increasing from 5 to 20mol %, while the elongation at break increased significantly from 57 to 150%. The moisture content of 10T/1014 copolyamides decreased with increasing the 1014 unit contents. It suggests that 10T/1014 copolyamides could be a kind of promising heat-resistant engineering thermoplastic in the future applications.
机译:聚(甲丁基对苯酰胺)(PA10T)是一种具有高强度和高模量的工程塑料,但其缺点之一是其突破的低伸长率。为了提高PA10t的柔韧性,将具有长烷基链的一种脂族共聚单体引入PA10t的分子链。然后通过在去离子水中的1,10-二氨基二烷,对苯二甲酸和1,12-十二烷二羧酸的缩聚反应,在1014单位的不同含量为10T / 1014合成长链半芳族共聚酰胺。得到所得聚酰胺的固有粘度范围为0.90-1.03dL / g。共聚物的化学和晶体结构的特征在于FTIR,H-1-NMR和WAXD。这些共聚酰胺在最大降解速率下表现出306-295℃的熔点范围,熔点为306-295℃,降低温度范围为479-472℃,并且还具有比PA10T更宽的加工窗口。 PA10T / 1014共聚物的拉伸强度从80.02〜72.95MPa逐渐降低,因为1014个单位的含量增加到20mol%,而断裂的伸长率显着增加到57%至150%。随着1014单位含量的增加,10T / 1014共聚酰胺的水分含量降低。它表明,10T / 1014共聚酰胺可以是未来应用中有希望的耐热工程热塑性塑料。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号