The Galvanized Coil Corrugating (GC) Line at Bokaro Steel Plant was commissioned in 1990. Capacity of GC Line is 90,000 T per annum corrugated sheets having 75 mm pitch, 18 mm depth and formed width of 1140 mm. Rated line speed is 47.5 mpm (meter per minute) for 1500 mm length, 65 mpm for 2500 mm length and 91 mpm for 3600 mm length. GC line has a flying cut off shear operated by a flying wheel with clutch and brake. This cut off press operates the die to cut the corrugated sheet in running line. Earlier the integrated line operation was controlled by ECIL make Progicon PLC. The system was commissioned by M/s UNICO, UK.
展开▼
机译：Bokaro钢铁厂的镀锌线圈波纹（GC）线于1990年委托。GC线的容量为90,000吨，每个年间波纹板具有75毫米间距，深度18毫米，形成为1140毫米。 额定线速度为47.5 mpm（仪表每分钟），长度为1500 mm长度，65 mm mm长，长度为91 mpm，长度为3600 mm。 GC线路用带离合器和制动器的飞轮操作的飞行剪切。 这种切断压力机操作管芯以在运行线中切割波纹板。 早些时候，综合线操作由ECIL Make Progicon PLC控制。 该系统由英国M / S Unico委托。
展开▼
