首页> 外文期刊>International Journal of Mineral Processing >Vanadium extraction from titano-magnetite by hydrofluoric acid
【24h】

Vanadium extraction from titano-magnetite by hydrofluoric acid

机译:用氢氟酸从二氧化钛 - 磁铁中提取钒

获取原文
获取原文并翻译 | 示例
           

摘要

Vanadium extraction from titano-magnetite by using hydrofluoric acid was put forward. The process of low intensity magnetic separation, hydrofluoric acid leaching, co-precipitation with NaOH, roasting with Na2CO3, circulating water leaching and precipitation of vanadium has been investigated. The results show that over 85% vanadium could be directly leached under the condition of sulfuric acid concentration of 5 mol/L, CaF2 dosage of 5%, leaching temperature of 95 degrees C, leaching time of 3 h and liquid to solid ratio of 3 mL/g. With the pH value of 4.5, temperature of 40 degrees C and time of 30 min, the co-precipitation rate of vanadium in the acid leaching solution was over 99%. The water leaching rate of vanadium of the co-precipitation reached 95% under the condition of roasting temperature of 800 degrees C, Na2CO3 dosage of 6%, roasting time of 1 h, leaching temperature of 90 degrees C, leaching time of 40 min, liquid to solid ratio of 2 mL/g and leaching stage of 4. Finally, the total recovery of vanadium could reach 81% and the purity of the product V2O5 was 99.65% meeting the standard specification with precipitation of vanadium and calcination. (C) 2016 Elsevier B.V. All rights reserved.
机译:提出了使用氢氟酸从二氧化钛 - 磁铁中提取钒。研究了低强度磁性分离,氢氟酸浸出,共沉淀,用NaOH,用Na 2 CO 3焙烧,循环水浸出和钒的沉淀。结果表明,超过85%的钒可以在硫酸浓度为5mol / L,CAF2剂量5%,浸出温度为95℃,浸出时间为3小时和液体比的条件下直接浸出3小时ml / g。具有4.5的pH值,温度40℃和30分钟的时间,酸浸出溶液中的钒的共沉淀速率超过99%。在烘焙温度的情况下,共沉淀钒的水浸出速率达到95%800℃,Na 2 CO 3剂量6%,烘焙时间为1小时,浸出温度为90℃,浸出时间40分钟,液体至固体比为2ml / g和4的浸出阶段。最后,钒的总回收率可以达到81%,产品V2O5的纯度为99.65%,达到钒和煅烧沉淀的标准规范。 (c)2016年Elsevier B.v.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号