首页> 外文期刊>Contributions to Mineralogy and Petrology >Experimental study of quartz inclusions in garnet at pressures up to 3.0 GPa: evaluating validity of the quartz-in-garnet inclusion elastic thermobarometer
【24h】

Experimental study of quartz inclusions in garnet at pressures up to 3.0 GPa: evaluating validity of the quartz-in-garnet inclusion elastic thermobarometer

机译:石榴石中石英夹杂物的实验研究高达3.0 GPA:评价石英石英夹杂物含有弹性热量计的有效性

获取原文
获取原文并翻译 | 示例
           

摘要

Garnet crystals with quartz inclusions were hydrothermally crystallized from oxide starting materials in piston-cylinder apparatuses at pressures from 0.5 to 3 GPa and temperatures ranging from 700 to 800 degrees C to study how entrapment conditions affect remnant pressures of quartz inclusions used for quartz-in-garnet (QuiG) elastic thermobarometry. Systematic changes of the 128, 206 and 464 cm(-1) Raman band frequencies of quartz were used to determine pressures of quartz inclusions in garnet using Raman spectroscopy calibrations that describe the P-T dependencies of Raman band shifts for quartz under hydrostatic pressure. Within analytical uncertainties, inclusion pressures calculated for each of the three Raman band frequencies are equivalent, which suggests that non-hydrostatic stress effects caused by elastic anisotropy in quartz are smaller than measurement errors. The experimental quartz inclusions have pressures ranging from -0.351 to 1.247 GPa that span the range of values observed for quartz inclusions in garnets from natural rocks. Quartz inclusion pressures were used to model P-T conditions at which the inclusions could have been trapped. The accuracy of QuiG thermobarometry was evaluated by considering the differences between pressures measured during experiments and pressures calculated using published equation of state parameters for quartz and garnet. Our experimental results demonstrate that Raman measurements performed at room temperature can be used without corrections to estimate garnet crystallization pressures. Calculated entrapment pressures for quartz inclusions in garnet are less than similar to 10% different from pressures measured during the experiments. Because the method is simple to apply with reasonable accuracy, we expect widespread usage of QuiG thermobarometry to estimate crystallization conditions for garnet-bearing silicic rocks.
机译:具有石英夹杂物的石榴石晶体从活塞 - 缸装置中的氧化物原料中的水热结晶,在0.5至3GPa的压力下,温度范围为700至800℃,研究夹带条件如何影响用于石英的石英夹杂物的残余压力石榴石(柱)弹性热量测量。使用石英的128,206和464cm(-1)拉曼带频率的系统变化用于使用拉曼光谱校准来确定石榴石中的石英夹杂物的压力,所述拉曼光谱校准描述了静水压力下石英的拉曼带偏移的P-T依赖性。在分析性不确定性内,为三个拉曼带频率中的每一个计算的包含压力是等同的,这表明石英中弹性各向异性引起的非静水压应力效应小于测量误差。实验性石英夹杂物的压力范围为-0.351至1.247 GPA,跨越从天然岩石的石榴石中观察到的值的值范围。石英夹杂物压力用于模拟夹杂物可以被困的P-T条件。通过考虑在使用公开的标准和石榴石的状态参数所测量的实验和压力期间测量的压力之间测量的压力之间的差异来评估QUIG热能测定法的准确性。我们的实验结果表明,在室温下进行的拉曼测量可以在没有校正以估计石榴石结晶压力。计算出石榴石中石英夹杂物的熵压力小于实验期间测量的压力的10%。由于该方法以合理的准确度适用于应用,因此我们预计Quig热能测量仪的广泛使用以估计有石榴石硅岩的结晶条件。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号